There are two types of oil coolers, cooled by air and cooled by liquid. > Cooled by air: They are heat exchangers where oil flows. They use the same working principle that a radiator uses; hot oil flows through some tubes with fins that join them. Those fins lower the fluid temperature.
The two most common types of oiling systems are wet sump and dry sump, each with its own components and characteristics. Understanding these differences, as well as the advantages and disadvantages of each, is essential to maximize their effectiveness for a given application.
Crude oil naming and classification Brent Crude: This is a major trading classification of crude oil originating from the North Sea. ...West Texas Intermediate (WTI): This oil is sourced from Texas and serves as a key benchmark for oil pricing in North America.
The oil cooler is a heat exchanger that reduces the oil
temperature.
OIL COOLER TYPES
There are two types of oil coolers, cooled by air and cooled
by liquid.
> Cooled by air: They are heat exchangers where oil fl ows.
They use the same working principle that a radiator uses;
hot oil fl ows through some tubes with fi ns that join them.
Those fi ns lower the fl uid temperature.
> Cooled by liquid: In this type of coolers there fl ows oil
and coolant. They have independent circuits, and heat
exchange produces inside the cooler, where the coolant
absorbs the oil’s heat excess. This type of cooler can
be installed in different areas of the engine bay, it’s not
necessary the exterior air to his function.