Car radiator is a very important part of the car, it is mainly responsible for heat dissipation, to ensure the normal operation of the engine. However, due to the dust, sediment and other sundries in the process of driving the car, the car radiator is easily polluted, which affects its heat dissipation effect. Therefore, it is very necessary to clean the car radiator regularly.
So, how to clean the car radiator? Three common cleaning methods are described below:
1. Clean with detergent
First of all, it is recommended to use a special harness cleaner. Spray the cleaner inside the radiator and rinse it with water. It should be noted that the water pressure should be controlled at a low level.
2. Air pump gun blowing
Use AN AIR PUMP TO CONNECT THE AIR GUN AND BLOW VERTICALLY FROM THE radiator, about 20 to 30 centimeters away from the radiator, and the air pressure should not be too high.
3. High pressure water gun flushing
It is best to wash from inside to outside in the opposite direction, with mist light pressure, the distance can not be too close, the water pressure can not be too high.
It should be noted that when cleaning the car radiator, too intense water pressure can not be used to avoid damage to the radiator. In addition, when cleaning, also pay attention to safety, do not let the water pressure gun spray on people.
The maintenance of automobile radiator is an important link to ensure the performance of automobile and extend its service life. Here are some key maintenance measures:
1. Avoid contact with acidic, alkaline, or corrosive substances : In daily use, the car radiator should be avoided from coming into contact with any acidic, alkaline, or corrosive items to avoid corrosion and damage. These substances may cause corrosion to the radiator, affect its heat dissipation effect, and even cause damage to the radiator.
2. Use soft water to maintain the radiator : It is recommended to use soft water to clean and maintain the radiator, because the water quality of soft water is better, it can play a better cooling effect in the radiator, while avoiding the scale caused by water quality problems affecting the heat dissipation .
3. Choose a good quality coolant : In order to prevent corrosion of the radiator, choose a good quality, non-corrosive coolant. This protects the car's radiator and extends its service life .
4. Regularly Clean the fuel system : Regularly clean the fuel system to control the formation of carbon deposits and keep the engine in optimal condition, which helps protect the engine and maintain good heat loss .
5. Clean the surface of the radiator : Clean the surface of the radiator regularly to remove dust, dirt and other impurities to ensure the efficiency of heat dissipation. It is recommended to clean the radiator surface at least once a year, using a soft brush and a water gun, but be careful not to use a high-pressure water gun to avoid damaging the heat sink .
6. Check the radiator hose : The radiator hose is responsible for conveying the coolant, and should be replaced in time if the hose is cracked or hardened. Regularly checking the condition of the hoses can prevent leaks from the cooling system .
7. Pay attention to the pressure of the cooling system : Regularly check that the pressure valve on the radiator cover is working properly and replace it if necessary to avoid overheating or even boiling the coolant .
8. Avoid overheating : Long periods of high speed driving or towing heavy objects can cause the engine to overheat, which can cause damage to the radiator. Avoiding the occurrence of this situation can effectively protect the radiator.
To sum up, regular cleaning and maintenance of car radiators is very necessary to ensure the normal operation of the engine. If you do not know how to clean and maintain the car radiator, you can refer to the above method!